{"id":9839,"date":"2019-07-03T18:44:52","date_gmt":"2019-07-03T18:44:52","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9839"},"modified":"2023-12-21T15:25:30","modified_gmt":"2023-12-21T15:25:30","slug":"c0208-bizhub-554e-454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0208-bizhub-554e-454e","title":{"rendered":"C0208 (bizhub 554e\/454e)"},"content":{"rendered":"\n

Contents <\/p>\n\n\n\n
\nTrouble type<\/td>\nTray 4 lift-up failure<\/td><\/tr>
\nTrouble code<\/td>\nC0208<\/td><\/tr>
\nRank<\/td>\nB<\/td><\/tr>
\nDetection timing<\/td>\nThe tray 4 upper limit sensor (PS126) is not blocked \neven after the set period of time has elapsed after the paper lift-up operation \nfor the drawer began.<\/td><\/tr>
\nTrouble isolation<\/td>\n\n\nTray 4<\/td><\/tr>
\nRelevant electrical parts<\/td> \u2022 Tray 4 lift-up motor (M123)
\u2022 Tray 4 upper limit sensor (PS126)
\u2022 PC control board (PCCB)
\u2022 MFP board (MFPB) <\/td><\/tr><\/tbody><\/table>\n\n\n\n

\n \n(2)Procedure\n\n\n\n\n<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M123-PCCB CN8 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M123 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS126-relay CN47-PCCB CN7 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS126 I\/O check, sensor check<\/td>PCCB CN7-3 (ON)<\/td>PC-210 8-K<\/td><\/tr>
5<\/td>M123 operation check<\/td>PCCB CN8-8 to 9<\/td>PC-210 5-K<\/td><\/tr>
6<\/td>Replace M123<\/a> (Part# 9J06M10300)<\/td> –<\/td>–<\/td><\/tr>
7<\/td>Replace PCCB<\/a> (part# Part# A2XMH00201)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace MFPB<\/a> (Part# A61FH02005)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n