{"id":9850,"date":"2019-07-03T18:56:23","date_gmt":"2019-07-03T18:56:23","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=9850"},"modified":"2023-12-21T15:25:30","modified_gmt":"2023-12-21T15:25:30","slug":"c0211-bizhub-554e-454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0211-bizhub-554e-454e","title":{"rendered":"C0211 (bizhub 554e\/454e)"},"content":{"rendered":"\n

Contents <\/p>\n\n\n\n
\nTrouble type<\/td>\nManual feed up\/down abnormality<\/td><\/tr>
\nTrouble code<\/td>\nC0211<\/td><\/tr>
\nRank<\/td>\nB<\/td><\/tr>
\nDetection timing<\/td> \u2022 Paper does not unblock the bypass lift-up position sensor (PS26) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
\u2022 The bypass lift-up position sensor (PS26) is not blocked even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. <\/td><\/tr>
\nTrouble isolation<\/td>\nManual<\/td><\/tr>
\nRelevant electrical parts<\/td> \u2022 Paper feed motor (M22)
\u2022 Bypass pick-up solenoid (SD1)
\u2022 Bypass lift-up position sensor (PS26)
\u2022 Printer control board (PRCB)
\u2022 Expansion control board (EXCB) <\/td><\/tr><\/tbody><\/table>\n\n\n\n

\n \n(2)Procedure\n\n\n\n\n<\/p>\n\n\n\n
\nStep<\/td>\nAction<\/td>\nControl signal<\/td>\nLocation of electrical \ncomponents<\/td><\/tr><\/thead>
\n1<\/td>\nCheck the connector between M22-EXCB CN3 for proper \nconnection and correct as necessary.<\/td>\n–<\/td>\n–<\/td><\/tr>
\n2<\/td>\nCheck the connector of M22 for proper drive coupling \nand correct as necessary.<\/td>\n–<\/td>\n–<\/td><\/tr>
\n3<\/td>\nCheck the connector between PS26-relay CN19-PRCB \nCN27 for proper connection and correct as necessary.<\/td>\n–<\/td>\n–<\/td><\/tr>
\n4<\/td>\nCheck the connector between SD1-relay CN21-relay \nCN19-PRCB CN27 for proper connection and correct as necessary.<\/td>\n–<\/td>\n–<\/td><\/tr>
\n5<\/td>\nPS26 I\/O check, sensor check<\/td>\nPRCB CN27-13 (ON)<\/td>\n4-C<\/td><\/tr>
\n6<\/td>\nSD1 operation check<\/td>\nPRCB CN27-10 (ON)<\/td>\n4-C<\/td><\/tr>
\n7<\/td>\nM22 operation check<\/td>\nEXCB CN3-5 to 8<\/td>\n22-P<\/td><\/tr>
\n8<\/td> Replace M22<\/a>M22 (Part# A61DM10000)<\/td>\n–<\/td>\n–<\/td><\/tr>
\n9<\/td> Replace EXCB<\/a>EXCB (Part# A5AYH00501)<\/td>\n–<\/td>\n–<\/td><\/tr>
\n10<\/td> Replace PRCB<\/a>PRCB (Part# 554e A61DH00101 454e A61EH00101)<\/td>\n–<\/td>\n–<\/td><\/tr><\/tbody><\/table>\n\n\n\n