How Can We Help?
10-01, 10-02, 10-40 (bizhub 360i/300i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
JAM type | Misfeed at manual bypass paper feed section | |
JAM code | 10-01, 10-02, 10-40 | |
JAM detection timing | 10-01: The leading edge of the paper is not turned ON (unblocked) the registration sensor (PS1) even after the lapse of a given period of time after the manual bypass tray starts to feed paper. | |
10-02: For paper fed from the manual bypass tray, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. | ||
10-40: For paper fed from the manual bypass tray, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
Misfeed processing location | Right door | |
Relevant parts | -Transport motor (M1) -Registration clutch (CL4) -Bypass tray paper feed clutch (CL7) -Bypass tray lift-up solenoid (SD1) -Bypass tray pick-up roller solenoid (SD6) -Registration sensor (PS1) -Base board (BASEB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS1 I/O check, sensor check | BASEB CN15E-9 (ON) | 4-C |
3 | CL4 load check Check code: 21 Multi code: 2 | BASEB CN15E-2 (ON) | 3-C |
4 | CL7 load check Check code: 20 Multi code: 3 | BASEB CN26EA-12 (ON) | 10-K |
5 | SD1 load check Check code: 23 Multi code: 3 | BASEB CN26EA-9 (ON) | 10-K |
6 | SD6 load check Check code: 23 Multi code: 3 | BASEB CN26EA-7 (ON) | 10-K |
7 | M1 load check Check code: 40 Multi code: 1, 4, 5 | BASEB CN19E-1 to 5 | 1-C |
8 | Replace BASEB. (Part# AC77H02101) | – | – |