How Can We Help?
10-01, 10-02, 10-40 (bizhub 4700i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
JAM type | Misfeed at manual bypass paper feed section | |
JAM code | 10-01, 10-02, 10-40 | |
JAM detection timing | 10-01: The leading edge of the paper is not turned ON (blocked) the registration sensor (PS9) even after the lapse of a given period of time after the manual bypass tray starts to feed paper. | |
10-02: For paper fed from the manual bypass tray, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. | ||
10-40: For paper fed from the manual bypass tray, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | ||
– Paper jam of a sheet of paper left at the manual bypass paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
Misfeed processing location | Right door | |
Relevant parts | -Main motor (M1) -Bypass tray paper feed clutch (CL2) -Registration clutch (CL4) -Registration sensor (PS9) -Base board (BASEB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS9 I/O check, sensor check | BASEB CN22EA-13 (ON) | 13-C |
3 | CL2 load check • Check code: 20 • Multi code: 4 | BASEB CN23E-10 (ON) | 9-K |
4 | CL4 load check • Check code: 21 • Multi code: 3 | BASEB CN22EA-3 (ON) | 12-C |
5 | M1 load checkCheck code: 40Multi code: 1, 2 | BASEB CN17E-1 to 5 | 1-C |
6 | Replace BASEB. 4700i (Part# ACTAH02014) | – | – |