How Can We Help?
10-01 (bizhub C759/C659)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at manual bypass feed section | |
| JAM code | 10-01 | |
| JAM detection timing | The leading edge of the paper is not turned ON the tray 1 vertical transport sensor (PS4) even after the lapse of a given period of time after the manual bypass tray starts to feed paper. | |
| – | When the main power switch is turned ON, residual paper detection starts between each sensor. Paper jam of a sheet of paper left at the manual bypass feed section results, if the tray 1 vertical transport sensor (PS4) is turned from OFF to ON while the tray 1 paper feed sensor (PS5) is OFF. | |
| Misfeed processing location | Manual bypass tray door | |
| Relevant parts | -Bypass paper feed motor (M27)-Tray 1 vertical transport motor (M5) -Tray 1 vertical transport sensor (PS4) -Paper feed/transport drive board (PFTDB) -MFP board (MFPB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS4 I/O check, sensor check | PFTDB CN14-8 (ON) | 1-P |
| 3 | M5 load check -Check code: 28 -Multi code: 9, 10, 11, 12 | PFTDB CN10-5 to 8 | 13-P |
| 4 | M27 load check -Check code: 28 -Multi code: 1, 2, 3, 4 | PFTDB CN9-3 to 6 | 12-P |
| 5 | PFTDB F11 or F13 conduction check | – | – |
| 6 | Replace PFTDB. (Part# A795H00200) | – | – |
| 7 | Replace MFPB. (Part# A8JEH02002) | – | – |
L.1.6.1 (Link to the Field Service Manual)