How Can We Help?
10-02 (bizhub C4000i/C3300i)
Contents
| JAM type | Misfeed at manual bypass paper feed section |
| JAM code | 10-02 |
| JAM detection timing | For paper fed from the manual bypass tray, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. |
| – | Paper jam of a sheet of paper left at the manual bypass paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Right door |
| Relevant parts | • Main motor (M1) • Bypass tray paper feed clutch (CL2) • Registration clutch (CL4) • Registration sensor (PS9) • Base board (BASEB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS9 I/O check, sensor check | BASEB CN22EA-13 (ON) | 13-C |
| 3 | CL2 load checkCheck code: 20Multi code: 4 | BASEB CN23E-10 (ON) | 9-K |
| 4 | CL4 load checkCheck code: 21Multi code: 3 | BASEB CN22EA-3 (ON) | 12-C |
| 5 | M1 load checkCheck code: 40Multi code: 1, 2 | BASEB CN17E-1 to 5 | 1-C |
| 6 | Replace BASEB. (Part# AAJRH02005) | – | – |
Please review all Part Numbers for accuracy and current versi