11-02 (bizhub C650i/C550i/C450i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at tray 1 paper feed section |
| JAM code | 11-02 |
| JAM detection timing | For paper fed from the tray 1, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. |
| – | Paper jam of a sheet of paper left at the tray 1 paper feed section results, if the tray 1 paper feed sensor (PS23) is turned ON when operation stops due to the tray 1 FD size error. |
| Misfeed processing location | -Right door -Tray 1 |
| Relevant parts | -Transport motor (M1) (bizhub C550i/C450i) -Paper feed motor (M22) -Registration motor (M24) (bizhub C650i) -Registration clutch (CL4) (bizhub C550i/C450i) -Registration sensor/1 (PS1) -Tray 1 paper feed sensor (PS23) -Registration sensor/2 (PS72) (bizhub C650i/C550i) -Base board (BASEB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | BASEB CN15E-9 (ON) | 4-C |
| 3 | PS72 I/O check, sensor check | BASEB CN15E-19 (ON) | 5-C |
| 4 | PS23 I/O check, sensor check | BASEB CN23E-2 (ON) | 15-K |
| 5 | CL4 load check: Check code: 21 Multi code: 2 | BASEB CN15E-2 (ON) | 3-C |
| 6 | M1 load check: Check code: 40 Multi code: 1, 2, 3, 4 (bizhub C650i), 1, 3, 4 (bizhub C550i), 1, 2, 4 (bizhub C450i) | BASEB CN19EA-1 to 5 | 1-C |
| 7 | M22 load check: Check code: 28 Multi code: 31, 32, 33, 34 (bizhub C650i), 31, 33, 34 (bizhub C550i), 31, 32, 34 (bizhub C450i) | BASEB CN31E-1 to 4 | 23-K |
| 8 | M24 load check: Check code: 26 Multi code: 1, 2, 3, 4 (bizhub C650i), 1, 3, 4 (bizhub C550i), 1, 2, 4 (bizhub C450i) | BASEB CN31E-9 to 12 | 24-K |
| 9 | Replace BASEB. (Part# AA7NH02102) | – | – |
L.1.5.2 (Link to the Field Service Manual)