12-01 (bizhub 754e/654e)
Contents
| JAM type | Tray 2 feed section | |
| JAM code | 12-01 | |
| Detection timing | The leading edge of the paper does not turn ON the tray 2 vertical transport sensor (PS12) even after the lapse of a given period of time after the tray 2 starts to feed paper. | |
| – | The tray 2 vertical transport sensor (PS12) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset. | |
| Misfeed processing location | Lower right door | |
| Relevant parts | • Take-up motor (M22) • Tray 2 paper feed clutch (CL2) • Tray 2 vertical transport sensor (PS12) • Tray 2 paper feed sensor (PS13) • Paper feed/transport drive board (PFTDB) • Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS12 I/O check, sensor check | PFTDB CN14-2 (ON) | 3-P |
| 3 | PS13 I/O check, sensor check | PFTDB CN13-7 (ON) | 3-P |
| 4 | CL2 operation check | PFTDB CN13-1 (REM) | 2-P |
| 5 | M22 operation check | PFTDB CN7-5 to 8 | 12-X |
| 6 | PFTDB ICP1, ICP3 or ICP12 conduction check | – | – |
| 7 | Replace PFTDB (Part# A2X0H00202) | – | – |
| 8 | PRCB ICP13 conduction check | – | – |
| 9 | Replace PRCB (Part# A55VH00105) | – | – |
- Link to the wiring diagram (N.1. bizhub 754e/654e)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.6.3 (Link to the Field Service Manual)