12-40 (bizhub 287/227)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at tray 2 feed section | |
| JAM code | 12-40 | |
| JAM detection timing | For paper fed from the tray 2, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | |
| – | Paper jam of a sheet of paper left at the tray 2 feed section results, if the tray 2 vertical transport sensor (PS19) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| – | Paper jam of a sheet of paper left at the tray 2 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
| Misfeed processing location | -Right door -Tray 2 | |
| Relevant parts | -Transport motor (M1) -Tray 2 paper feed clutch (CL1) -Tray 2 vertical transport clutch (CL2) -Tray 2 vertical transport sensor (PS19) -MFP board (MFPB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS19 I/O check, sensor check | MFPB CN11E-7 (ON) | 6-C |
| 3 | CL1 operation check | MFPB CN11E-4 (ON) | 6-C |
| 4 | CL2 operation check | MFPB CN11E-2 (ON) | 5-C |
| 5 | M1 operation check | MFPB CN19E-3 to 7 | 26-C |
| 6 | MFPB F6E conduction check | – | – |
| 7 | Replace MFPB. (Part# A7AHH0201D) | – | – |
- Link to the wiring diagram (bizhub 367/287/227)
K.1.6.3 (Link to the Field Service Manual)