How Can We Help?
13-01, 13-40 (bizhub 950i/850i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
JAM type | Misfeed at tray 3 paper feed section | |
JAM code | 13-01, 13-40 | |
JAM detection timing | 13-01 | The leading edge of the paper is not turned ON the tray 3 paper feed sensor (PS21) even after the lapse of a given period of time after the tray 3 starts to feed paper. |
13-40 | For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. | |
– | Paper jam of a sheet left at the tray 3 paper feed section results, if the tray3 paper feed sensor (PS21) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
– | Paper jam of a sheet of paper left at the tray 3 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed processing location | -Tray 3 -Tray 4 -Tray 3/4 horizontal transport unit | |
Relevant parts | -LCC transport motor (M25) -Tray 3 paper feed clutch (CL5) -Tray 3 paper feed sensor (PS21) -Paper feed/transport drive board (PFTDB) -Base board (BASEB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS21 I/O check, sensor check | PFTDB CN17-9 (ON) | 6-X |
3 | CL5 load checkCheck code: 20Multi code: 3 | PFTDB CN16-6 (REM) | 5-X |
4 | M25 load checkCheck code: 28Multi code: 25, 26, 27, 28 | PFTDB CN13-1 to 7 | 11-X |
5 | PFTDB F21 or F23 conduction check. | – | – |
6 | Replace PFTDB. | – | – |
7 | Replace BASEB. | – | – |