14-40 (bizhub C360i/C300i/C250i)
Contents
| JAM type | Misfeed at tray 4 paper feed section |
| JAM code | 14-40 |
| JAM detection timing | For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| – | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | • Right door • Tray 4 |
| Relevant parts | • Tray 4 paper feed motor (M121) • Tray 4 vertical transport motor (M122) • Tray 4 paper feed sensor (PS122) • Tray 4 vertical transport sensor (PS123) • PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS122 I/O check, sensor check | PCCB CN18C-2 (ON) | PC-216 7-K |
| 3 | PS123 I/O check, sensor check | PCCB CN18C-5 (ON) | PC-216 7-K |
| 4 | M121 load checkCheck code: 28Multi code: 16, 19, 20 | PCCB CN9C-1 to 8 | PC-216 6-K |
| 5 | M122 load checkCheck code: 28Multi code: 26, 29, 30 | PCCB CN9C-9 to 16 | PC-216 6-K |
| 6 | Replace PCCB. (PC-216 Part# AAV5H00201) |
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
L.1.5.5 (Link to the Field Service Manual)