14-40 (bizhub C650i/C550i/C450i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
When PC-216 is installed
Contents
| JAM type | Misfeed at tray 4 paper feed section (When PC-216 is installed) |
| JAM code | 14-40 |
| JAM detection timing | For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| – | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | -Right door -Tray 4 |
| Relevant parts | -Tray 4 paper feed motor (M121) -Tray 4 vertical transport motor (M122) -Tray 4 paper feed sensor (PS122) -Tray 4 vertical transport sensor (PS123) -PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS122 I/O check, sensor check | PCCB CN18C-2 (ON) | PC-216 7-K |
| 3 | PS123 I/O check, sensor check | PCCB CN18C-5 (ON) | PC-216 7-K |
| 4 | M121 load check: Check code: 28 Multi code: 16, 17, 18, 19 (bizhub C650i), 16, 18, 19 (bizhub C550i), 16, 17, 19 (bizhub C450i) | PCCB CN9C-1 to 8 | PC-216 6-K |
| 5 | M122 load check: Check code: 28 Multi code: 26, 27, 28, 29 (bizhub C650i), 26, 28, 29 (bizhub C550i), 26, 27, 29 (bizhub C450i) | PCCB CN9C-9 to 16 | PC-216 6-K |
| 6 | Replace PCCB. (PC-116 Part# AAV5H00101 / PC-216 Part# AAV5H00201) | – | – |
When PC-417 is installed
Contents
| JAM type | Misfeed at tray 4 paper feed section (When PC-417 is installed) |
| JAM code | 14-40 |
| JAM detection timing | For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the tray 4 paper feed section results, if the tray 4 paper feed sensor (PS162) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Right door |
| Relevant parts | -Transport motor (M152) -Tray 4 paper feed clutch (CL161) -Tray 4 paper feed sensor (PS162) -PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS162 I/O check, sensor check | PCCB CN4-11 (ON) | PC-417 3-C |
| 3 | CL161 operation check | PCCB CN19-3 (ON) | PC-417 6-C |
| 4 | M152 load check: Check code: 28 Multi code: 51, 52, 53, 54 (bizhub C650i), 51, 53, 54 (bizhub C550i), 51, 52, 54 (bizhub C450i) | PCCB CN5-1 to 8 | PC-417 7-K |
| 5 | Replace PCCB. (Part# AAV5H01401) | – | – |
L.1.5.5 (Link to the Field Service Manual)