15-01 (bizhub C658/C558/C458)

You are here:

Contents

JAM typeMisfeed at external LCT paper feed section
JAM code15-01
JAM detection timingThe leading edge of the paper is not turned ON the LU paper feed sensor (PS3) even after the lapse of a given period of time after the external LCT starts to feed paper.
– Paper jam of a sheet of paper left at the external LCT feed section results, if the paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
– Paper jam of a sheet of paper left at the external LCT feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
Misfeed processing locationLower right door
Relevant parts• LU paper feed motor (M2)
• LU paper feed sensor (PS3)
• LU drive board (LUDB)
• MFP board (MFPB)
• PC control board (PCCB)

 Procedure

StepActionControl signalLocation of electrical component
1Initial check items
2PS3 I/O check, sensor checkLUDB CN5-8 (ON)LU-207/LU-302 4-G
3M2 operation checkLUDB CN4-5 to 8LU-207/LU-302 3-G
4Replace LUDB. (LU-207 Part # A87VH01000 / LU-302
Part # A87VH01000)
5Replace MFPB. (C368/C308/C258 Part# A7PUH02123 / C458 Part# A79MH02102 / C558 or C658 Part # A79JH02102 )
6Replace PCCB. (PC-115/ PC-215 Part# A2XMH00101/ PC-415 Part# A2XMH00301)
  • Link to the wiring diagram (LU-207)
  • Link to the wiring diagram (LU-302)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.1.9.6 (Link to the Field Service Manual)