How Can We Help?
16-40 (bizhub C360i/C300i/C250i)
Contents
| JAM type | Misfeed at transfer LCT paper feed/transport section |
| JAM code | 16-40 |
| JAM detection timing | For paper fed from the transfer LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output. |
| – | Paper jam of a sheet of paper left at the transfer LCT transport section results, if the vertical transport sensor (PS133) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| – | Paper jam of a sheet of paper left at the transfer LCT transport section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. |
| Misfeed processing location | Right door |
| Relevant parts | • Paper feed motor (M131) • Vertical transport motor (M132) • Paper feed sensor (PS132) • Vertical transport sensor (PS133) • PC control board (PCCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS132 I/O check, sensor check | PCCB CN4-11 (ON) | PC-416 7-J |
| 3 | PS133 I/O check, sensor check | PCCB CN4-14 (ON) | PC-416 7-J |
| 4 | M131 load checkCheck code: 28Multi code: 1, 4, 5 | PCCB CN5-1 to 8 | PC-416 5-J |
| 5 | M132 load checkCheck code: 28Multi code: 6, 9, 10 | PCCB CN5-9 to 16 | PC-416 4-J |
| 6 | Replace PCCB. (PC-416 Part# AAV5H00300) | – | – |
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
L.1.5.7 (Link to the Field Service Manual)