How Can We Help?
17-40, 17-41 (bizhub 950i/850i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
JAM type | Misfeed at tray 3/4 intermediate transport roller section | |
JAM code | 17-40, 17-41 | |
JAM detection timing | 17-40 | LCC vertical transport sensor (PS28) is not turned ON even after the lapse of a given period of time after the leading edge of the paper has turned ON the tray 4 paper feed sensor (PS26). |
17-41 | The tray 2 vertical transport sensor (PS12) is not turned ON even after the lapse of a given period of time after the leading edge of the paper has turned ON the LCC vertical transport sensor (PS28). | |
– | Paper jam of a sheet of paper left at the tray 3/4 intermediate transport roller section results, if the tray LCC vertical transport sensor (PS28) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
– | Paper jam of a sheet of paper left at the tray 3/4 intermediate transport roller section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | |
Misfeed processing location | -Right bottom door -Tray 3/4 horizontal transport unit | |
Relevant parts | -LCC vertical transport motor (M26) -LCC transport motor (M25) -Tray 2 vertical transport motor (M7) -Tray 4 paper feed clutch (CL7) -LCC Vertical transport sensor (PS28) -Tray 4 paper feed sensor (PS26) -Tray 2 vertical transport sensor (PS12) -Paper feed/transport drive board (PFTDB) -Base board (BASEB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS28 I/O check, sensor check | PFTDB CN15-15 (ON) | 10-X |
3 | PS26 I/O check, sensor check | PFTDB CN19-3 (ON) | 7-X |
4 | PS12 I/O check, sensor check | PFTDB CN12-10 (ON) | 1-P |
5 | CL7 load check -Check code: 20 -Multi code: 4 | PFTDB CN18-2 (REM) | 7-X |
6 | M26 load check -Check code: 28 -Multi code: 29, 30, 31, 32 | PFTDB CN11-1 to 4 | 10-X |
7 | M25 load check -Check code: 28 -Multi code: 25, 26, 27, 28 | PFTDB CN13-1 to 7 | 11-X |
8 | M7 load check -Check code: 28 -Multi code: 13, 14, 15, 16 | PFTDB CN10-9 to 12 | 18-P |
9 | PFTDB F21, F23, F24, or F27 conduction check. | – | – |
10 | Replace PFTDB. | – | – |
11 | Replace BASEB. | – | – |