20-02 (bizhub 558/458)
Contents
| JAM type | Misfeed at vertical transport section |
| JAM code | 20-02 |
| JAM detection timing | For paper fed from the tray 2, tray 3, tray 4, or LCT, loop forming has not been complete before a sheet enters the registration roller because the rise timing of load to perform registration is earlier than the rise timing of load to form a loop. |
| Misfeed processing location | Right door |
| Relevant parts | • Transport motor (M1) • Tray 2 vertical transport motor (M23) • Tray 2 vertical transport clutch (CL2) • Registration clutch (CL4) • Registration sensor 1 (PS1) • Registration sensor 2 (PS72) (bizhub 558) • Tray 2 vertical transport sensor (PS19) • Expansion control board (EXCB) • Front side board (FRB) • MFP board (MFPB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | EXCB CN6-3 (ON) | 26-P |
| 3 | PS72 I/O check, sensor check | EXCB CN6-5 (ON) | 26-P |
| 4 | PS19 I/O check, sensor check | MFPB CN34E<A>-2 (ON) | 26-I |
| 5 | CL4 operation check | FRB CN8-7 (CL4_REM) | 4-K |
| 6 | M1 operation check | MFPB CN14E-3 (REM)MFPB CN14E-6 (LOCK) | 1-C |
| 7 | M23 operation check | EXCB CN7-9 to 12 | 25-P |
| 8 | Replace FRB. (Part# A9HJH00501) | – | – |
| 9 | Replace EXCB. (Part# A9HGH00501) | – | – |
| 10 | MFPB F1E conduction check | – | – |
| 11 | Replace MFPB. (558 Part# A9HGH02102 / 458 Part# A9HHH02102) | – | – |
- Link to the wiring diagram (bizhub 558/458)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.11.1 (Link to the Field Service Manual)