How Can We Help?
32-01, 32-05, 32-06, 32-30 (bizhub 650i/550i/450i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers
Contents
JAM type | Misfeed at fusing/paper exit section | |
JAM code | 32-01, 32-05, 32-06, 32-30 | |
JAM detection timing | 32-01: The leading edge of the paper is not turned ON (unblocked) the ADU paper passage sensor/1 (PS40) even after the lapse of a given period of time after the reverse sequence is started. | |
32-05: The paper exit sensor (PS3) is not turned OFF (blocked) even after the lapse of a given period of time after the leading edge of the paper has turned ON (unblocked) PS3. | ||
32-06: The paper exit sensor (PS3) is not turned ON (unblocked) even after the lapse of a given period of time after the leading edge of the paper has turned ON (unblocked) the fusing loop sensor (PS2). | ||
32-30: A trouble of the heating roller assy’s failure to turn has been detected during a print cycle. | ||
-: Paper jam of a sheet of paper left at the paper exit section results, if the paper exit sensor (PS3) is turned ON (unblocked) when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
-: Paper jam of a sheet of paper left at the paper exit section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset. | ||
Misfeed processing location | Right door | |
Relevant parts | -Fusing motor (M3) -Paper exit/reverse motor (M4) -ADU transport motor/1 (M5) -Exit path switch solenoid (SD3) -Fusing loop sensor (PS2) -Paper exit sensor (PS3) -ADU paper passage sensor/1 (PS40) -Expansion control board (EXCB) -Base board (BASEB) |
Procedure
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS2 I/O check, sensor check | EXCB CN13EX-6 (ON) | 15-X |
3 | PS3 I/O check, sensor check | BASEB CN22E-3 (ON) | 11-C |
4 | PS40 I/O check, sensor check | BASEB CN22E-6 (ON) | 11-C |
5 | SD3 load check Check code: 83 Multi code: 0 | BASEB CN13E-7 (ON) | 14-C |
6 | M3 load check Check code: 45 Multi code: 1, 2, 3, 4, 6 (bizhub 650i) 1, 3, 4, 6 (bizhub 550i) 1, 2, 4, 6 (bizhub 450i) | BASEB CN19E-6 to 10 | 1-C |
7 | M4 load check Check code: 84 Multi code: 1, 2, 3, 4, 6, 7, 8, 9 (bizhub 650i) 1, 3, 4, 6, 8, 9 (bizhub 550i) 1, 2, 4, 6, 7, 9 (bizhub 450i) | BASEB CN18E-3 to 6 | 6-C |
8 | M5 load check Check code: 85 Multi code: 1, 2, 3, 4 (bizhub 650i) 1, 3, 4 (bizhub 550i) 1, 2, 4 (bizhub 450i) | BASEB CN18E-7 to 10 | 6-C |
9 | Replace EXCB. (Part# AC74H00501) | – | – |
10 | Replace BASEB. (Part# AC74H02101) | – | – |