66-12 (bizhub 368/308)

You are here:

Contents

JAM typeMisfeed at DF paper feed section
JAM code66-12
JAM detection timing<When DF-629 or DF-704 is installed>
The size of the original on the tray detected by DF does not match the size of the original detected by the main body.
Misfeed processing locationLeft cover
Relevant parts<When DF-629 is installed> 
• Document feed motor (M2) 
• After separate sensor (PS2) 
• Document length size sensor 1 (PS6) 
• Document length size sensor 2 (PS7) 
• Document width size sensor (VR1) 
• DF control board (DFCB)
<When DF-704 is installed>
• Document feed motor (M2) 
• After separate sensor (PS2) 
• Document length size sensor 1 (PS8) 
• Document length size sensor 2 (PS9) 
• Document width size sensor (VR1) 
• DF control board (DFCB)

 Procedure

 When DF-629 is installed

StepActionControl signalLocation of electrical component
1Initial check items
2Make the adjusting the pressure of the separation roller.
3PS2 I/O check, sensor checkDFCB J14-8 (ON)DF-629 6-G
4PS6 I/O check, sensor checkDFCB J12-6 (ON)DF-629 4-G
5PS7 I/O check, sensor checkDFCB J12-5 (ON)DF-629 4-G
6VR1 I/O check, sensor checkDFCB J12-3 (ON)DF-629 4-G
7M2 operation checkDFCB J5-1 to 4DF-629 2-B
8Replace DFCB. (Part# A87RPP1700)
  • Link to the wiring diagram (DF-629)

 When DF-704 is installed

StepActionControl signalLocation of electrical component
1Initial check items
2Make the adjusting the pressure of the separation roller.
3PS2 I/O check, sensor checkDFCB J14-8 (ON)DF-704 6-G
4PS8 I/O check, sensor checkDFCB J12-6 (ON)DF-704 3 to 4-G
5PS9 I/O check, sensor checkDFCB J12-5 (ON)DF-704 3-G
6VR1 I/O check, sensor checkDFCB J12-3 (ON)DF-704 4-G
7M2 operation checkDFCB J5-1 to 4DF-704 1 to 2-B
8Replace DFCB. (Part# A85GPP0M00)
  • Link to the wiring diagram (DF-704)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.1.14.2 (Link to the Field Service Manual)