72-14 (bizhub 554e/454e)

Contents

JAM type	FS transport section
JAM code	72-14
Detection timing	<When FS-534 is installed> The staple stacker paper detection sensor (PS31) is not turned ON even after the set period of time has elapsed after the saddle exit sensor (PS5) is turned ON by the paper.
	<When FS-535 is installed> The SD exit sensor (PS12) is not turned ON even after the set period of time has elapsed after the Z-fold punch regist sensor (PS2) is turned ON by the paper.
Misfeed processing location	Front door
Relevant parts	<When FS-534 is installed> • Saddle exit sensor (PS5) • Staple stacker paper detection sensor (PS31) • FS control board (FSCB)
	<When FS-535 is installed> • Z-fold punch regist sensor (PS2) • SD exit sensor (PS12) • FS control board (FSCB)

 (2)ProcedureWhen FS-534 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS5 I/O check, sensor check	FSCB J5-2 (ON)	FS-534 10-K
3	PS31 I/O check, sensor check	FSCB J12-11 (ON)	FS-534 6-C
4	Replace FSCB (Part# A3EPPPBE01)	–	–

• Link to the wiring diagram (N.3.8 FS-534)

When FS-535 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS2 I/O check, sensor check	FSCB J5-2 (ON)	FS-534 10-K
3	PS12 I/O check, sensor check	FSCB J12-11 (ON)	FS-534 6-C
4	Replace FSCB (Part# A2Y1H10002)	–	–

• Link to the wiring diagram (N.3.10 FS-535)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.1.10.4 (Link to the Field Service Manual)