72-14 (bizhub C554/C454)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | FS transport section | ||
| JAM code | 72-14 | ||
| Detection timing | <When FS-534 is installed> The staple stacker paper detection sensor (PS31) is not turned ON even after the set period of time has elapsed after the saddle exit sensor (PS5) is turned ON by the paper. | ||
| <When FS-535 is installed> The SD exit sensor (PS12) is not turned ON even after the set period of time has elapsed after the Z-fold punch regist sensor (PS2) is turned ON by the paper. | |||
| Misfeed processing location | Front door | ||
| Relevant parts | <When FS-534 is installed> -Saddle exit sensor (PS5) -Staple stacker paper detection sensor (PS31) -FS control board (FSCB) | ||
| <When FS-535 is installed> -Z-fold punch regist sensor (PS2) -SD exit sensor (PS12) -FS control board (FSCB) |
(2)Procedure When FS-534 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS5 I/O check, sensor check | FSCB J5-2 (ON) | FS-534 10-K |
| 3 | PS31 I/O check, sensor check | FSCB J12-11 (ON) | FS-534 6-C |
| 4 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.3.8 FS-534)
When FS-535 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB J5-2 (ON) | FS-534 10-K |
| 3 | PS12 I/O check, sensor check | FSCB J12-11 (ON) | FS-534 6-C |
| 4 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.3.10 FS-535)
K1.10.3 (Link to the Field Service Manual)