How Can We Help?
72-16 (bizhub C658/C558/C458)
Contents
JAM type | Misfeed at FS transport section | ||||
JAM code | 72-16 | ||||
JAM detection timing | <When FS-533 is installed> The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the main body’s paper exit sensor (PS3) is turned OFF (unblocked) by the paper. | ||||
<When FS-533+PK-519 is installed> The paper feed sensor (PS101) is not turned ON even after the set period of time has elapsed after the paper feed sensor (PS201) is turned ON by the paper. | |||||
<When FS-536 or FS-536SD is installed> The FNS entrance sensor (PS4) is not turned ON even after the set period of time has elapsed after the RU entrance sensor (PS2) is turned ON (blocked) by the paper. | |||||
<When FS-537 or FS-537SD is installed> The FNS entrance sensor (PS34) is not turned ON even after the set period of time has elapsed after the RU entrance sensor (PS2) is turned ON (blocked) by the paper. | |||||
Misfeed processing location | Finisher paper feed section (When FS-533 is installed)Horizontal conveyance cover (When FS-536, FS-536SD, FS-537, or FS-537SD is installed) | ||||
Relevant parts | <When FS-533 or FS-533+PK-519 is installed> • Paper conveyance motor (M101) • Paper exit sensor (PS3) • Paper feed sensor (PS101) • FS control board (FSCB) • MFP board (MFPB) | ||||
<When FS-536 or FS-536SD is installed> • RU entrance sensor (PS2) • FNS entrance sensor (PS4) • FS control board (FSCB) | |||||
<When FS-537 or FS-537SD is installed> • RU entrance sensor (PS2) • FNS entrance sensor (PS34) • FS control board (FSCB) |
Procedure
When FS-533 or FS-533+PK-519 is installed
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS3 I/O check, sensor check | MFPB CN17E-7 (ON) | 5-C |
3 | PS101 I/O check, sensor check | FSCB CN111 | FS-533 7-D to E |
4 | PS201 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 5-C |
5 | M101 operation check | FSCB CN101 | FS-533 6-J |
6 | FSCB CP101 conduction check | – | – |
7 | Replace FSCB (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2)) | – | – |
8 | Replace MFPB. (C458 Part# A79MH02102 / C558 or C658 Part # A79JH02102) | – | – |
- Link to the wiring diagram (bizhub C658/C558/C458)
- Link to the wiring diagram (FS-533)
When FS-536 or FS-536SD is installed
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS2 I/O check, sensor check | FSCB J6-7 (ON) | FS-536/FS-536SD 12-K |
3 | PS4 I/O check, sensor check | FSCB J4<B>-9 (ON) | FS-536/FS-536SD 15-C |
4 | Replace FSCB. (Part# A87GPP0V00) | – | – |
- Link to the wiring diagram (FS-536/FS-536SD)
When FS-537 or FS-537SD is installed
Step | Action | Control signal | Location of electrical component |
---|---|---|---|
1 | Initial check items | – | – |
2 | PS2 I/O check, sensor check | FSCB J8<B>-11 (ON) | FS-537/FS-537SD 9-D |
3 | PS34 I/O check, sensor check | FSCB J8<A>-5 (ON) | FS-537/FS-537SD 7-D |
4 | Replace FSCB. (Part# A87HPP9M01) | – | – |
- Link to the wiring diagram (FS-537/FS-537SD)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.17.4 (Link to the Field Service Manual)