72-18 (bizhub C754/C654)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | FS transport section | ||
| JAM code | 72-18 | ||
| Detection timing | <When FS-534 is installed> -The saddle exit sensor (PS5) is not turned ON even after the set period of time has elapsed after the FNS entrance sensor (PS4) is turned ON by the paper. -While the buffer is controlled, the saddle exit sensor (PS5) is not tuned ON even after the set period of time has elapsed after the reverse rotation drive is started. | ||
| <When FS-535 is installed> The stacker entrance sensor (PS3) is not turned ON even after the set period of time has elapsed after the Z-fold punch regist sensor (PS2) is turned ON by the paper. | |||
| Misfeed processing location | Front door | ||
| Relevant parts | <When FS-534 is installed> -FNS entrance sensor (PS4) -Saddle exit sensor (PS5) -FS control board (FSCB) | ||
| <When FS-535 is installed> -Z-fold punch regist sensor (PS2) -Stacker entrance sensor (PS3) -FS control board (FSCB) |
(2)ProcedureWhen FS-534 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS4 I/O check, sensor check | FSCB J7-13 (ON) | FS-534 8-K |
| 3 | PS5 I/O check, sensor check | FSCB J5-2 (ON) | FS-534 10-K |
| 4 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.4 Finisher FS-534)
When FS-535 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB CN14-10 (ON) | FS-535 7-D |
| 3 | PS3 I/O check, sensor check | FSCB CN21-5 (ON) | FS-535 7-L |
| 4 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.2.7 Finisher FS-535)
K.1.10.8 (Link to the Field Service Manual)