72-21 (bizhub C754/C654)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | FS transport section | ||
| JAM code | 72-21 | ||
| Detection timing | <When FS-534 is installed> The main tray exit sensor sensor (PS16) is not turn OFF even after the set period of time has elapsed after the start of exiting paper. | ||
| <When FS-535 is installed> The staples stacker empty sensor (PS15) is not turn OFF even after the set period of time has elapsed after the start of exiting paper. | |||
| Misfeed processing location | Front door | ||
| Relevant parts | <When FS-534 is installed> -Main tray exit sensor (PS16) -FS control board (FSCB) | ||
| <When FS-535 is installed> -Staples stacker empty sensor (PS15) -FS control board (FSCB) |
(2)ProcedureWhen FS-534 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS16 I/O check, sensor check | FSCB J9<B>-2 (ON) | FS-534 9-C |
| 3 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.4 Finisher FS-534)
When FS-535 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS15 I/O check, sensor check | FSCB CN19-14 (ON) | FS-535 11-D |
| 3 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.2.7 Finisher FS-535)
K.1.10.10 (Link to the Field Service Manual)