72-22 (bizhub 554e/454e)
Contents
| JAM type | FS transport section | ||
| JAM code | 72-22 | ||
| Detection timing | <When FS-534 is installed> The sub tray exit sensor (PS8) is not blocked even after the set period of time has elapsed after the paper reaches the paper transport acceleration point. | ||
| <When FS-535 is installed> The sub tray exit sensor (PS8) is not blocked even after the set period of time has elapsed after the Z-fold punch regist sensor (PS2) is turned ON by the paper. | |||
| Misfeed processing location | Front door | ||
| Relevant parts | <When FS-534 is installed> • Sub tray exit sensor (PS8) • FS control board (FSCB) | ||
| <When FS-535 is installed> • Z-fold punch regist sensor (PS2) • Sub tray exit sensor (PS8) • FS control board (FSCB) |
(2)ProcedureWhen FS-534 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS8 I/O check, sensor check | FSCB J9<B>-6 (ON) | FS-534 9-C |
| 3 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.3.8 FS-534)
When FS-535 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB CN14-10 (ON) | FS-535 7-D |
| 3 | PS8 I/O check, sensor check | FSCB CN24-10 (ON) | FS-535 8-L |
| 4 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.3.10 FS-535)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.10.11 (Link to the Field Service Manual)