72-35 (bizhub C554/C454)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | PI section | ||
| JAM code | 72-35 | ||
| Detection timing | <When FS-535+PI-505 is installed> -When a paper is fed from the upper tray, the paper entrance sensor /Lw (PS206) is not turned ON even after the set period of time has elapsed after the paper entrance sensor /Up (PS201) is turned ON by the paper. -When a paper is fed from the lower tray, The paper entrance sensor /Lw (PS206) is not turned ON even after the set period of time has elapsed after the transfer clutch /Lw (CL202) is turned ON by the paper. | ||
| Misfeed processing location | Upper door | ||
| Relevant parts | -Transfer clutch /Lw (CL202) -Paper entrance sensor /Up (PS201) -Paper entrance sensor /Lw (PS206) -PI drive board (PIDB) -FS control board (FSCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS201 I/O check, sensor check | PIDB CN53<A>-2 (ON) | PI-505 8-C to D |
| 3 | PS206 I/O check, sensor check | PIDB CN53<A>-5 (ON) | PI-505 8-C to D |
| 4 | CL202 operation check | PIDB CN56-1 (ON) | PI-505 7-C to D |
| 5 | Replace PIDB (Part# A10AH01001) | – | – |
| 6 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.3.13 PI-505)
K1.10.15 (Link to the Field Service Manual)