72-41 (bizhub C650i/C550i/C450i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | Misfeed at ZU section (When FS-540+ZU-609 or FS-540SD+ZU-609 is installed) |
| JAM code | 72-41 |
| JAM detection timing | When the second fold is started in Z-fold mode, the FNS middle sensor (PS36) is not switched from ON to OFF by the paper after the set period of time has elapsed. |
| Misfeed processing location | Front door |
| Relevant parts | -ZU transport motor (M500) -Folding guide motor (M501) -FNS discharge motor (M17) -FNS middle sensor (PS36) -ZU drive board (ZUDB) -FS control board (FSCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS36 I/O check, sensor check | FSCB J12<A>-10 (ON) | FS-540/FS-540SD 14 to 15-D |
| 3 | M500 operation check | ZUDB CN6-1 to 6 | ZU-609 1 to 2-B |
| 4 | M501 operation check | ZUDB CN6-9 to 12 | ZU-609 2-B |
| 5 | M17 operation check | FSCB J12<B>-1 to 4 | FS-540/FS-540SD 14-D |
| 6 | ZUDB ICP1 or ICP2 conduction check | – | – |
| 7 | Replace ZUDB. (Part# A63GH00100) | – | – |
| 8 | Replace FSCB. (Part# AAR5PPD401) | – | – |
L.1.9.14 (Link to the Field Service Manual)