72-43 (bizhub 360i/300i)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
When FS-533+PK-519 is installed
Contents
| JAM type | Misfeed at PK section (When FS-533+PK-519 is installed) |
| JAM code | 72-43 |
| JAM detection timing | The punch motor sensor (PS202) does not detect rotation of the punch motor even after the lapse of a given period of time after the punch motor (M201) started operating. |
| Misfeed processing location | Finisher punch section |
| Relevant parts | -Punch motor (M201) -Punch motor sensor (PS202) -PK control board (PKCB) -FS control board (FSCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS202 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 5-C |
| 3 | M201 operation check | PKCB CN203-1 to 2 | FS-533 (PK-519) 4-C |
| 4 | Replace PKCB. (Part# A3EWPP3102) | – | – |
| 5 | Replace FSCB. (Part# A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2) | – | – |
When FS-539+PK-524 or FS-539SD+PK-524 is installed
Contents
| JAM type | Misfeed at PK section (When FS-539+PK-524 or FS-539SD+PK-524 is installed) |
| JAM code | 72-43 |
| JAM detection timing | The punch position sensor (PS2) is not turned ON (unblocked) after a lapse of a given time after the punch drive motor (M1) starts rotating. |
| Misfeed processing location | Front door |
| Relevant parts | -Punch drive motor (M1) -Punch position sensor (PS2) -FS control board (FSCB) |
Procedure
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB J7-2 (ON) | FS-539/FS-539SD (PK-524) 13-K |
| 3 | M1 operation check | FSCB J7-7 to 8 | FS-539/FS-539SD (PK-524) 13-K |
| 4 | Replace FSCB. (Part# AAR4PP8201) | – | – |