72-43 (bizhub C360i/C300i/C250i)

Contents

JAM type			Misfeed at PK JAM
JAM code			72-43
JAM detection timing			<When FS-533+PK-519 is installed> The punch motor sensor (PS202) does not detect rotation of the punch motor even after the lapse of a given period of time after the punch motor (M201) started operating.
			<When FS-536+PK-520 or FS-536SD+PK-520 is installed> The punch position sensor (PS2) is not turned OFF (unblocked) even after the lapse of a given period of time after the punch drive motor (M1) starts rotating.
Misfeed processing location			• Finisher punch section (When FS-533+PK-519 is installed) • Front door (When FS-536+PK-520 or FS-536SD+PK-520 is installed)
Relevant parts			<When FS-533+PK-519 is installed> • Punch motor (M201) • Punch motor sensor (PS202) • PK control board (PKCB) • FS control board (FSCB)
			<When FS-536+PK-520 or FS-536SD+PK-520 is installed> • Punch drive motor (M1) • Puncher home sensor (PS2) • FS control board (FSCB)

Procedure

When FS-533+PK-519 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS202 I/O check, sensor check	PKCB CN204	FS-533 (PK-519) 5-C
3	M201 operation check	PKCB CN203-1 to 2	FS-533 (PK-519) 4-C
4	Replace PKCB. (PK-519 Part# A3EWPP3102)	–	–
5	Replace FSCB. (FS-533 Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))	–	–

When FS-536+PK-520 or FS-536SD+PK-520 is installed

Step	Action	Control signal	Location of electrical component
1	Initial check items	–	–
2	PS2 I/O check, sensor check	FSCB J7-2 (ON)	FS-536/FS-536SD (PK-520) 13-K
3	M1 operation check	FSCB J7-7 to 8	FS-536/FS-536SD (PK-520) 13-K
4	Replace FSCB. (FS-536(SD) (Part# A87GPP0V00)	–	–

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.1.9.11 (Link to the Field Service Manual)