How Can We Help?
72-43 (bizhub C554e/C454e)
Contents
| JAM type | PK JAM | ||
| JAM code | 72-43 | ||
| Detection timing | <When FS-533+PK-519 is installed> The punch motor (PS202) does not detect rotation of the punch motor after the laps of given time after the punch motor (M201) started operating. | ||
| <When FS-534+PK-520 is installed> The punch position sensor (PS2) is not unblocked after a lapse of a given time after the punch drive motor (M1) starts rotating. | |||
| <When FS-535+PK-521 is installed> The PK punch hole position sensor/2 (PS301) is not unblocked after a lapse of a given time after the punch drive motor (M301) starts rotating. | |||
| Misfeed processing location | • Finisher punch section (When FS-533+PK-519 is installed) • Front door (When FS-534+PK-520 or FS-535+PK-521 is installed) | ||
| Relevant parts | <When FS-533+PK-519 is installed> • Punch motor (M201) • Punch motor sensor (PS202) • PK control board (PKCB) • FS control board (FSCB) | ||
| <When FS-534+PK-520 is installed> • Punch drive motor (M1) • Punch position sensor (PS2) • FS control board (FSCB) | |||
| <When FS-535+PK-521 is installed> • Punch drive motor (M301) • PK punch hole position sensor/2 (PS301) • Punch control board (PKCB) • FS control board (FSCB) |
(2)ProcedureWhen FS-533+PK-519 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS202 I/O check, sensor check | PKCB CN204 | FS-533 (PK-519) 5-C |
| 3 | M201 operation check | PKCB CN203-1 to 2 | FS-533 (PK-519) 4-C |
| 4 | Replace PKCB (Part# A3EWPP3102) | – | – |
| 5 | Replace FSCB (Part # A2YUPPH901 for Model No. A2YU-WY1 or Part # A2YUPPXN00 for Model No. A2YU-WY2) | – | – |
- Link to the wiring diagram (N.3.7 FS-533)
When FS-534+PK-520 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS2 I/O check, sensor check | FSCB J7-2 (ON) | FS-534 (PK-520) 6-K |
| 3 | M1 operation check | FSCB J7-7 to 8 | FS-534 (PK-520) 7-K |
| 4 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.3.8 FS-534)
When FS-535+PK-521 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS301 I/O check, sensor check | PKCB CN36-5 (ON) | PK-521 3-C |
| 3 | M301 operation check | PKCB CN35-1 to 3 | PK-521 2-C |
| 4 | ReplacePKCB (Part# A2YRH10103) | – | – |
| 5 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.3.11 PK-521)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.10.21 (Link to the Field Service Manual)