72-86 (bizhub C368/C308/C258)
Contents
| JAM type | Misfeed at SD transport section | ||||
| Misfeed at JAM code | 72-86 | ||||
| JAM detection timing | <When FS-534SD is installed> The SD entrance sensor (PS1) is not turned OFF (unblocked) even after the set period of time has elapsed after it is turned ON (blocked).When paper discharge control motor abnormality occurs during paper trailing edge control movement. | ||||
| Misfeed processing location | Front door | ||||
| Relevant parts | • SD entrance sensor (PS1) • Paper discharge control motor (M2) • SD drive board (SDDB) • FS control board (FSCB) |
Procedure
When FS-534SD is installed
| Step | Action | Control signal | Location of electrical component |
|---|---|---|---|
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | SDDB J4-8 (ON) | SD-511 4-B |
| 3 | M2 operation check | SDDB J5-4 to 7 | SD-511 3-B |
| 4 | Replace SDDB. (Part# A3ERPP6J03) | – | – |
| 5 | Replace FSCB. (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (SD-511)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.1.16.16 (Link to the Field Service Manual)