72-86 (bizhub C554/C454)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| JAM type | SD transport section | ||
| JAM code | 72-86 | ||
| Detection timing | <When FS-534+SD-511 is installed> The SD entrance sensor (PS1) is not unblocked even after the set period of time has elapsed after it blocked.When paper discharge control motor abnormality occurs during paper trailing edge control movement. | ||
| <When FS-535+SD-512 is installed> The SD transport sensor (PS1) is not unblocked even after the set period of time has elapsed after it blocked. | |||
| Misfeed processing location | Front door | ||
| Relevant parts | <When FS-534+SD-511 is installed> -SD entrance sensor (PS1) -Paper discharge control motor (M2) -SD drive board (SDDB) -FS control board (FSCB) | ||
| <When FS-535+SD-512 is installed> -SD transport sensor (PS1) -SD drive board (SDDB) -FS control board (FSCB) |
(2)ProcedureWhen FS-534+SD-511 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | SDDB J4-8 (ON) | SD-511 4-B |
| 3 | M2 operation check | SDDB J5 4 to 7 | SD-511 3-B |
| 4 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 5 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.3.9 SD-511)
When FS-535+SD-512 is installed
| Step | Action | Control signal | Location of electrical component |
| 1 | Initial check items | – | – |
| 2 | PS1 I/O check, sensor check | SDDB J4-8 (ON) | SD-511 4-B |
| 3 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 4 | Replace FSCB (Part# A2Y1H10002) | – | – |
K1.10.36 (Link to the Field Service Manual)