C0206 (bizhub C364e/C284e/C224e)
Contents
| Trouble type | Tray 3 lift-up failure |
| Trouble code | C0206 |
| Rank | B |
| Detection timing | The tray 3 upper limit sensor (PS116) is not blocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began. |
| Trouble isolation | Tray 3 |
| Relevant electrical parts | • Tray 3 lift-up motor (M113) • Tray 3 upper limit sensor (PS116) • PC control board (PCCB) • MFP board (MFPB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M113-PCCB CN6 for proper connection and correct as necessary. | – | – |
| 2 | Check the connector of M113 for proper drive coupling and correct as necessary. | – | – |
| 3 | Check the connector between PS116-relay CN24-PCCB CN4 for proper connection and correct as necessary. | – | – |
| 4 | PS116 I/O check, sensor check | PCCB CN4-3 (ON) | PC-110/PC-210 7-C |
| 5 | M113 operation check | PCCB CN6-8 to 9 | PC-110/PC-210 2-C |
| 6 | Replace M113 (Part# 9J06M10300) | – | – |
| 7 | Replace PCCB (PC-110 Part# A2XMH00101 / PC-210 Part# A2XMH00201) | – | – |
| 8 | Replace MFPB (Part# A5C1H0200B) | – | – |
- Link to the wiring diagram (N.2.3 PC-110)
- Link to the wiring diagram (N.2.4 PC-210)
- Link to the layout drawings for related parts by each trouble code (S.8. C0206)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.5.8 (Link to the Field Service Manual)