C0211 (bizhub 658e/558e/458e)
Contents
| Trouble type | C0211: Manual feed up/down abnormality |
| Rank | B |
| Trouble detection condition | • The bypass lift-up position sensor (PS26) is not turned OFF (unblock) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass lift-up position sensor (PS26) is not turned ON (blocked) even after the paper feed motor (M22) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. |
| Trouble isolation | Manual |
| Relevant electrical parts | • Paper feed motor (M22) • Bypass pick-up solenoid (SD1) • Bypass lift-up position sensor (PS26) • Expansion control board (EXCB) • MFP board (MFPB) |
Procedure
- Check the connector between M22-relay CN220-EXCB CN7 for proper connection and correct as necessary.
- Check the connector of M22 for proper drive coupling and correct as necessary.
- Check the connector between PS26-relay CN19-MFPB CN19E for proper connection and correct as necessary.
- Check the connector between SD1-relay CN21-relay CN19-MFPB CN19E for proper connection and correct as necessary.
- PS26 I/O check, sensor check
- Control signal: MFPB CN19E-13 (ON)
- Location of electrical component: 22-I
- SD1 load check
- Check code: 23
- Multi code: 3
- Control signal: MFPB CN19E-9 (ON)
- Location of electrical component: 22-I
- M22 load check
- Check code: 28
- Multi code: 25, 26, 27, 28
- Control signal: EXCB CN7-5 to 8
- Location of electrical component: 25-P
- Replace M22. (Part# A61DM10000)
- Replace EXCB. (Part# A9HGH00501)
- MFPB F1E conduction check
- Replace MFPB. (658e/558e Part# AA6RH02103 / 458e Part# AA6UH02101)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
L.3.7.14 (Link to the Field Service Manual)