C0211 (bizhub C364/C284/C224)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | Manual feed up/down abnormality |
| Trouble code | C0211 |
| Rank | B |
| Detection timing | -Paper does not unblock the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. -The bypass lift-up position sensor (PS26) is not blocked even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. |
| Trouble isolation | Manual |
| Relevant electrical parts | -Transport motor (M1) -Bypass pick-up solenoid (SD1) -Bypass lift-up position sensor (PS26) -Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M1-PRCB CN31 for proper connection and correct as necessary. | – | – |
| 2 | Check the connector of M1 for proper drive coupling and correct as necessary. | – | – |
| 3 | Check the connector between PS26-relay CN19-PRCB CN27 for proper connection and correct as necessary. | – | – |
| 4 | Check the connector between SD1-relay CN21-relay CN19-PRCB CN27 for proper connection and correct as necessary. | – | – |
| 5 | PS26 I/O check, sensor check | PRCB CN27-13 (ON) | 4-C |
| 6 | SD1 operation check | PRCB CN27-10 (ON) | 4-C |
| 7 | M1 operation check | PRCB CN31-2 (REM)PRCB CN31-5 (LOCK) | bizhub C364 21-I to Jbizhub C284 22-I to Jbizhub C224 24-I to J |
| 8 | Replace M1 (Part# A161M10001) | – | – |
| 9 | PRCB ICP5 conduction check | – | – |
| 10 | Replace PRCB (Part# A161H00108) | – | – |
- Link to the wiring diagram (N.1. bizhub C364/C284/C224)
- Link to the layout drawings for related parts by each trouble code (S.11. C0211)
K3.5.11 (Link to the Field Service Manual)