C0216 (bizhub 650i/550i/450i)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble type	C0216: External LCT up/down abnormality (When LU-207 or LU-302 is installed)
Rank	B
Trouble detection condition	The LU upper limit sensor (PS2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	LCT
Relevant electrical parts	-LU upper limit sensor (PS2) -LU lift-up motor (M1) -LU drive board (LUDB)

Procedure

1. Check the connector between M1-LUDB CN3 for proper connection and correct as necessary.
2. Check the connector of M1 for proper drive coupling and correct as necessary.
3. Check the connector between PS2-relay CN406 (LU-207), relay CN3 (LU-302)-LUDB CN5 for proper connection and correct as necessary.
4. PS2 I/O check, sensor check
   • Control signal: LUDB CN5-3 (ON)
   • Location of electrical component: LU-207/LU-302 4-G
5. M1 load check
   • Check code: 23
   • Multi code: 8
   • Control signal: LUDB CN3-4 (ON)
   • Location of electrical component: LU-207/LU-302 3-G
6. Replace M1. (LU-207 / LU-302) (Part# A00JR74900)
7. Replace LUDB. (LU-207 / LU-302)
   LU-207 (Part# A87VH01000)
   LU-302 (Part# A87VH01000)

(Link to the Field Service Manual)