C0216 (bizhub C658/C558/C458)

Contents

Trouble type	C0216: External LCT up/down abnormality (When LU-207 or LU-302 is installed)
Rank	B
Trouble detection condition	The LU upper limit sensor (PS2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Trouble isolation	LCT
Relevant electrical parts	•LU upper limit sensor (PS2) • LU lift-up motor (M1) • LU drive board (LUDB)

 Procedure

1. Check the connector between M1-LUDB CN3 for proper connection and correct as necessary.
2. Check the connector of M1 for proper drive coupling and correct as necessary.
3. Check the connector between PS2-relay CN406 (LU-207), Cn3 (LU-302)-LUDB CN5 for proper connection and correct as necessary.
4. PS2 I/O check, sensor check
   • Control signal: LUDB CN5-3 (ON)
   • Location of electrical component: LU-207/LU-302 4-G
5. M1 operation check
   • Control signal: LUDB CN3-4 (ON)
   • Location of electrical component: LU-207/LU-302 3-G
6. Replace M1. (LU-207 Part# A00JR74900 / LU-302 Part# A00JR74900)
7. Replace LUDB. (LU-207 Part# A87VH01000/ LU-302 Part# A87VH01000)

NOTICE

• Link to the wiring diagram (LU-207)
• Link to the wiring diagram (LU-302)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.8.13 (Link to the Field Service Manual)