C1103 (bizhub 554e/454e)

Contents

Trouble type	Alignment plate motor/Frs malfunction
Trouble code	C1103
Rank	B
Detection timing	<When FS-533 is installed> • The alignment plate home sensor/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment plate home sensor/F (PS108) is not blocked after the set period of time has elapsed after the alignment motor/F (M105) is turned ON to return the plate to the home position.
	<When FS-534 is installed> • The alignment plate/F home sensor (PS12) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position. • The alignment plate/F home sensor (PS12) is not blocked after the set period of time has elapsed after the alignment motor/front (M7) is turned ON to return the plate to the home position. • The alignment plate/F does not reach the specified position within the set period of time.
	<When FS-535 is installed> The alignment plate motor home sensor/Fr (PS17) is not blocked even after the set period of time has elapsed while the alignment plate motor/Fr (M11) is energized.
Trouble isolation	–
Relevant electrical parts	<When FS-533 is installed> • Alignment motor/F (M105) • Alignment plate home sensor/F (PS108) • FS control board (FSCB)
	<When FS-534 is installed> • Alignment motor/Front (M7) • Alignment plate/F home sensor (PS12) • FS control board (FSCB)
	<When FS-535 is installed> • Alignment plate motor/Fr (M11) • Alignment plate motor home sensor/F (PS17) • FS control board (FSCB)

 (2)ProcedureWhen FS-533 is installed

Step	Action	Control signal	Location of electrical components
1	Check the connector between M105-FSCB CN102 for proper connection and correct as necessary.	–	–
2	Check the connector of M105 for proper drive coupling and correct as necessary.	–	–
3	Check the connector between PS108-FSCB CN102 for proper connection and correct as necessary.	–	–
4	PS108 I/O check, sensor check	FSCB CN102	FS-533 7-J
5	M105 operation check	FSCB CN102	FS-533 7-J
6	Replace M105 (Part# A2YUPPW600)	–	–
7	FSCB CP105 conduction check	–	–
8	Replace FSCB (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))	–	–

• Link to the wiring diagram (N.3.7 FS-533)
• Link to the layout drawings for related parts by each trouble code (S.20.1 FS-533)

When FS-534 is installed

Step	Action	Control signal	Location of electrical components
1	Check the connector between M7-FSCB J4 for proper connection and correct as necessary.	–	–
2	Check the connector of M7 for proper drive coupling, and correct as necessary.	–	–
3	Check the connector between PS12-FSCB J4 for proper connection and correct as necessary.	–	–
4	PS12 I/O check, sensor check	FSCB J4<B>-4 (ON)	FS-534 13-C
5	M7 operation check	FSCB J4<A>-5 to 8	FS-534 11-C to D
6	Replace M7 (Part# A3EPPP5500)	–	–
7	Replace FSCB (Part# A3EPPPBE01)	–	–

• Link to the wiring diagram (N.3.8 FS-534)
• Link to the layout drawings for related parts by each trouble code (S.20.2 FS-534)

When FS-535 is installed

Step	Action	Control signal	Location of electrical components
1	Check the connector between M11-FSCB CN19 for proper connection and correct as necessary.	–	–
2	Check the connector of M11 for proper drive coupling, and correct as necessary.	–	–
	Check the connector between PS17-FSCB CN20 for proper connection and correct as necessary.	–	–
3	PS17 I/O check, sensor check	FSCB CN20-6 (ON)	FS-535 12-D
4	M11 operation check	FSCB CN19-1 to 4	FS-535 10-D
5	Replace M11 (Part# A2Y1R70200)	–	–
6	FSCB ICP4 conduction check	–	–
7	Replace FSCB (Part# A2Y1H10002)	–	–

• Link to the wiring diagram (N.3.10 FS-535)
• Link to the layout drawings for related parts by each trouble code (S.20.3 FS-535)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.6.7 (Link to the Field Service Manual)