C1125 (bizhub 554e/454e)
Contents
| Trouble type | Sheet feeder up/down drive failure (upper) | |
| Trouble code | C1125 | |
| Rank | B | |
| Detection timing | <When FS-535+PI-505 is installed> The tray lower limit sensor /Up (PS205) or tray upper limit sensor /Up (PS204) are not turned ON even after the set period of time has elapsed after the tray lift motor /Up (M201) is energized. | |
| Trouble isolation | Post Inserter | |
| Relevant electrical parts | • Tray lift motor /Up (M201) • Tray upper limit sensor /Up (PS204) • Tray lower limit sensor /Up (PS205) • PI drive board (PIDB) • FS control board (FSCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M201-relay CN203-PIDB CN54 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M201 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS204-relay CN235-PIDB CN55 for proper connection, and correct as necessary. | – | – |
| 4 | Check the connector between PS205-relay CN235-PIDB CN55 for proper connection, and correct as necessary. | – | – |
| 5 | PS204 I/O check, sensor check | PIDB CN55-8 (ON) | PI-505 5-C to D |
| 6 | PS205 I/O check, sensor check | PIDB CN55-7 (ON) | PI-505 6-C to D |
| 7 | M201 operation check | PIDB CN54-7 to 8 | PI-505 4-C to D |
| 8 | Replace M201 (Part# A10YA6560) | – | – |
| 9 | PIDB ICP2 conduction check | – | – |
| 10 | Replace PIDB (Part# A10AH01001) | – | – |
| 11 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.3.13 PI-505)
- Link to the layout drawings for related parts by each trouble code (S.30. C1125)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.6.17 (Link to the Field Service Manual)