How Can We Help?

C1141 (bizhub 658e/558e/458e/368e/308e)

You are here:

Contents

Trouble typeC1141: FNS paddle motor drive malfunction
RankB
Trouble detection condition<When FS-536 or FS-536SD is installed>
The upper paddle home position detection sensor (PS14) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed while the FNS paddle motor (M5) is turning.
<When FS-537 or FS-537SD is installed>
The paddle home sensor (PS25) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed while the FNS paddle motor (M9) is turning.
Trouble isolationStaple
Relevant electrical parts<When FS-536 or FS-536SD is installed>
• FNS paddle motor (M5)
• Upper paddle home position detection sensor (PS14)
• FS control board (FSCB)
< When FS-537 or FS-537SD is installed>
• FNS paddle motor (M9)
• Paddle home sensor (PS25)
• FS control board (FSCB)

 Procedure

 When FS-536 or FS-536SD is installed

  1. Check the connector between M5-FSCB J4 for proper connection and correct as necessary.
  2. Check the connector of M5 for proper drive coupling and correct as necessary.
  3. Check the connector between PS14-FSCB J4 for proper connection and correct as necessary.
  4. PS14 I/O check, sensor check
    • Control signal: FSCB J4<B>-7 (ON)
    • Location of electrical component: FS-536/FS-536SD 15-C
  5. M5 operation check
    • Control signal: FSCB J4<A>-9 to 12
    • Location of electrical component: FS-536/FS-536SD 14-C
  6. Replace M5. (Part# A3EPPP5500)
  7. Replace FSCB. (Part# A87GPP0V00)

 When FS-537 or FS-537SD is installed

  1. Check the connector between M9-relay CN13<B>-FSCB J14 for proper connection and correct as necessary.
  2. Check the connector of M9 for proper drive coupling and correct as necessary.
  3. Check the connector between PS25-relay CN13<B>-FSCB J14 for proper connection and correct as necessary.
  4. PS25 I/O check, sensor check
    • Control signal: FSCB J14<B>-10 (ON)
    • Location of electrical component: FS-537/FS-537SD 16-K to L
  5. M9 operation check
    • Control signal: FSCB J14<B>-4 to 7
    • Location of electrical component: FS-537/FS-537SD 17-K to L
  6. Replace M9. (Part# A87HPPA600)
  7. Replace FSCB. (Part# A87HPP9M01)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

L.3.8.23 (Link to the Field Service Manual)

Table of Contents