C1152 (bizhub 558/458)
Contents
| Trouble type | C1152: Paper transport belt motor’s malfunction | |
| Rank | B | |
| Trouble detection condition | <When FS-537SD is installed> Even after a predetermined period of time has elapsed since the paper transport belt motor (M34) starts operation, the lock signal is not set to L (turning). | |
| Trouble isolation | Center Stapling/Half-Fold/Tri-Fold | |
| Relevant electrical parts | • Paper transport belt motor (M34) • SD control board (SDCB) • FS control board (FSCB) |
Procedure
- Check the connector between M34-relay CN21-FSCB J24 for proper connection and correct as necessary.
- Check the connector of M34 for proper drive coupling and correct as necessary.
- M34 operation check
- Control signal: FSCB J24-1 to 11
- Location of electrical component: FS-537/FS-537SD 7-M
- Replace M34. (Part# A0PNM10200)
- Replace SDCB. (Part# A3ERPP6J03)
- Replace FSCB. (Part# A87HPP9M01)
NOTICE
- Link to the wiring diagram (FS-537/FS-537SD)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.9.29 (Link to the Field Service Manual)