C1195 (bizhub C754/C654)
Contents
| Trouble type | Paper discharge control motorâ??s malfunction (When FS-534+SD-511 is installed) | ||
| Paper receiving guide control motor malfunction (When FS-535+SD-512 is installed) | |||
| Trouble code | C1195 | ||
| Rank | B | ||
| Detection timing | <When FS-534+SD-511 is installed> The curl cover detection sensor (PS2) is not blocked or unblocked even after the set period of time has elapsed after the paper discharge control motor (M2) is turned ON. | ||
| <When FS-535+SD-512 is installed> The paper receiving guide home sensor (PS2) is not blocked or unblocked even after the set period of time has elapsed after the paper receiving guide control motor (M2) is turned ON. | |||
| Trouble isolation | Half-Fold/Tri-Fold Center Stapling | ||
| Relevant electrical parts | <When FS-534+SD-511 is installed> -Paper discharge control motor (M2) -Curl cover detection sensor (PS2) -SD drive board (SDDB) -FS control board (FSCB) | ||
| <When FS-535+SD-512 is installed> -Paper receiving guide control motor (M2) -Paper receiving guide home sensor (PS2) -SD drive board (SDDB) -FS control board (FSCB) |
(2)ProcedureWhen FS-534+SD-511 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M2 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary. | – | – |
| 4 | PS2 I/O check, sensor check | SDDB J5 3 (ON) | SD-511 3-B |
| 5 | M2 operation check | SDDB J5 4 to 7 | SD-511 3-B |
| 6 | Replace M2 (Part# A3ERPP3N00) | – | – |
| 7 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 8 | Replace FSCB (Part# A3EPPPBE01) | – | – |
- Link to the wiring diagram (N.2.5 Saddle stitcher SD-511)
- Link to the layout drawings for related parts by each trouble code (S.44.1 SD-511)
When FS-535+SD-512 is installed
| Step | Action | Control signal | Location of electrical components |
| 1 | Check the connector between M2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary. | – | – |
| 2 | Check the connector of M2 for proper drive coupling, and correct as necessary. | – | – |
| 3 | Check the connector between PS2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary. | – | – |
| 4 | PS2 I/O check, sensor check | SDDB J5-3 (ON) | SD-512 3-B |
| 5 | M2 operation check | SDDB J5-4 to 7 | SD-512 2-B |
| 6 | Replace M2 (Part# A3EPPP5600) | – | – |
| 7 | Replace SDDB (Part# A3ERPP6J03) | – | – |
| 8 | Replace FSCB (Part# A2Y1H10002) | – | – |
- Link to the wiring diagram (N.2.9 Saddle sticher SD-512)
- Link to the layout drawings for related parts by each trouble code (S.44.2 SD-512)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.6.35 (Link to the Field Service Manual)