C2152 (bizhub C368/C308/C258)

Contents

Trouble type	• C2152: Transfer belt fault at initial position return
Rank	B
Trouble detection condition	The 1st transfer pressure sensor (PS39) is unable to detect “switch from retraction to pressure” or “switch from pressure to retraction” within a given period time after the 1st transfer pressure clutch (CL5) has stared engagement during an initial position return.
Trouble isolation	–
Relevant electrical parts	• Fusing motor (M3) • 1st transfer pressure clutch (CL5) • 1st transfer pressure sensor (PS39) • MFP board (MFPB)

 Procedure

1. Check the connector between M3-MFPB CN8E for proper connection and correct as necessary.
2. Check the connector of M3 for proper drive coupling and correct as necessary.
3. Check the connector between PS39-relay CN113-MFPB CN15EB for proper connection and correct as necessary.
4. Check the connector between CL5-relay CN118-MFPB CN15EA for proper connection and correct as necessary.
5. PS39 I/O check, sensor check
   • Control signal: MFPB CN15EB-17 (ON)
   • Location of electrical component: 10-C
6. CL5 operation check
   • Control signal: MFPB CN15EA-18 (ON)
   • Location of electrical component: 8-C
7. M3 operation check
   • Control signal: MFPB CN8E-9 (REM), MFPB CN8E-12 (LOCK)
   • Location of electrical component: 2-C
8. Replace M3. (Part# A7PUM10000)
9. MFPB ICP2E conduction check
10. Replace MFPB. (Part# A7PUH02123)

NOTICE

• Link to the wiring diagram (bizhub C368/C308/C258)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.11.1 (Link to the Field Service Manual)