C2A14 (bizhub 368/308)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC2A14: Drum unit/K new release failure
RankB
Trouble detection conditionThe status with the new unit is not cleared after the new drum unit is set.
Trouble isolation–
Relevant electrical partsDrum unitFront side board (FRB)MFP board (MFPB)

 Procedure

  1. Clean the connection between the drum unit and the machine if dirty.
  2. Reinstall the drum unit.
  3. Check the connector between the drum unit-FRB CN12 for proper connection and correct as necessary.
  4. Check the connector between FRB CN1, CN3-MFPB CN4E, CN11E for proper connection and correct as necessary.
  5. Replace the drum unit. (Part# A7U40RD)
  6. Replace FRB. (Part# A9HJH00501)
  7. Replace MFPB. (Part# A9HJH02102)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.10.8 (Link to the Field Service Manual)