C3103 (bizhub C650i/C550i/C450i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble typeC3103: Pressure roller release failure
RankB
Trouble detection conditionThe fusing pressure home sensor (PS38) is not turned OFF (unblocked) even after the lapse of a predetermined period of time after the fusing pressure motor (M11) has started rotating during retraction of the pressure roller.
Trouble isolation–
Relevant electrical parts-Fusing unit
-Fusing pressure motor (M11)
-Fusing pressure home sensor (PS38)
-Expansion control board (EXCB)
-CPU board (CPUB)
-Base board (BASEB)

Procedure

  1. Check the connector between M11-relay CN112-EXCB CN14EX for proper connection and correct as necessary.
  2. Check the connector between the fusing unit-relay CN95, CN96-BASEB CN4E for proper connection and correct as necessary.
  3. Check the connector between EXCB CN2EX-BASEB CN12E for proper connection and correct as necessary.
  4. Check CPUB for proper installation and correct as necessary.
  5. PS38 I/O check, sensor check
    • Control signal: BASEB CN4E-3 (ON)
    • Location of electrical component: 7-C
  6. M11 load check
    • Check code: 45
    • Multi code: 7, 8, 9
    • Control signal: EXCB CN14EX-11 to 14
    • Location of electrical component: 18-P
  7. Replace M11. (Part# A161M10300)
  8. Replace the fusing unit. (C650i/C550i Part# AA7NR70200 / C450i Part# AA7RR70700)
  9. Replace EXCB. (Part# AA2JH00500)
  10. Replace CPUB. (C450i Part# AA7RH02P02 / C550i Part# AA7PH02P01 / C650i Part# AA7NH02P03)
  11. Replace BASEB. (Part# AA7NH02102)

L.3.10.1 (Link to the Field Service Manual)