How Can We Help?

C3922 (bizhub C658/C558/C458)

Posted
ByAdministrator Administrator
You are here:

Contents

Trouble typeC3922: Fusing sensor wire breaks detection (Edge of the heating roller)
RankA
Trouble detection conditionAfter a predetermined period of time after the warm-up stage is started, the heating roller temperature sensor2 (TEMS/2) or heating roller thermistor1 (TH1) voltage does not decrease by predetermined steps (temperature rise) within a predetermined period of time.
Trouble isolation–
Relevant electrical parts• Fusing unit
• (bizhub C658): Heating roller temperature sensor2 (TEMS/2)
• (bizhub C558/C458): Heating roller thermistor1 (TH1)
• IH power supply (IHPU) (bizhub C658/C558/C458 only)
• MFP board (MFPB)

 Procedure

  1. Check the fusing unit for correct installation (whether it is secured in position).
  2. Check the open/close operation of the right door.
  3. Check the fusing unit-MFPB CN22E for proper connection and correct or change as necessary. (bizhub C658/C558)
  4. Check the fusing unit-MFPB CN12E for proper connection and correct or change as necessary. (bizhub C458)
  5. Check the connector between TEMS/1-relay CN109-MFPB CN15E for proper connection and correct as necessary. (bizhub C658/C558)
  6. Check the connector between TEMS/2-relay CN138-MFPB CN15E for proper connection and correct as necessary. (bizhub C658/C558)
  7. Replace the fusing unit. (bizhub C658/C558 Part# A79JR71066 / bizhub C458 Part# A79MR70222)
  8. Replace IHPU. (bizhub C658/C558 only) (Part# A8KNM40A02)
  9. MFPB F12E conduction check
  10. Replace MFPB. (C458 Part# A79MH02102 / C558 or C658 Part # A79JH02102)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.14.9 (Link to the Field Service Manual)

Table of Contents