C6102 (bizhub 554e/454e)
(1)Contents
| Trouble type | Drive system home sensor malfunction |
| Trouble code | C6102 |
| Rank | B |
| Detection timing | • The scanner home sensor (PS201) is unable to detect the scanner located at its home position. • The scanner home sensor (PS201) is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance. • The scanner home sensor (PS201) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it blocks the scanner home sensor (PS201). |
| Trouble isolation | Scanner |
| Relevant electrical parts | • Scanner home sensor (PS201) • Scanner motor (M201) • Scanner drive board (SCDB) • Printer control board (PRCB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Correct or change the scanner drive (pulley, gear, belt) if it is faulty. | – | – |
| 2 | Correct the scanner motor set screw if loose. | – | – |
| 3 | Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.]. | – | – |
| 4 | Check the connector between M201-SCDB PJ4 for proper connection and correct as necessary. | – | – |
| 5 | Check the connector between PS201-SCDB PJ6 for proper connection and correct as necessary. | – | – |
| 6 | Check the connector between SCDB PJ2-PRCB CN43 for proper connection and correct as necessary. | – | – |
| 7 | PS201 I/O check, sensor check | SCDB PJ6-3 (ON) | 27-P |
| 8 | M201 operation check | SCDB PJ4-1 to 4 | 27-P |
| 9 | Replace SCDB (Part# A5C1H01A11) | – | – |
| 10 | Replace PRCB (554e Part# A61DH00101) / 454e Part# A61EH00101) | – | – |
- Link to the wiring diagram (N.1. bizhub 554e/454e)
- Link to the layout drawings for related parts by each trouble code (S.98. C6102, C6103)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
K.3.11.3 (Link to the Field Service Manual)