C6754 (bizhub C554/C454)
Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.
Contents
| Trouble type | CIS clamp adjustment failure |
| Trouble code | C6754 |
| Rank | B |
| Detection timing | After the gain adjustment is performed at the start-up, the CIS clamp adjustment value is too high or too low. |
| Trouble isolation | Scanner |
| Relevant electrical parts | -CIS module (CIS) -Dual scan image processing board (DSIPB) -CIS power supply (CISPU) -MFP board (MFPB) |
(2)Procedure
| Step | Action | Control signal | Location of electrical components |
| 1 | Correct the harness connection between CIS and DSIPB if faulty. | – | – |
| 2 | Correct the harness connection between CIS and CISPU if faulty. | – | – |
| 3 | Check for possible extraneous light and correct as necessary. | – | – |
| 4 | Clean the back side reading glass and the shading sheet if dirty. | – | – |
| 5 | Replace CIS (Part# A3CEM70000) | – | – |
| 6 | Replace DSIPB (Part# A161H02A00) | – | – |
| 7 | Replace CISPU (Part# A3CEPP4Y00) | – | – |
| 8 | Replace MFPB (Part# A2XKH02004) | – | – |
- Link to the layout drawings for related parts by each trouble code (S.113. C6754, C6755, C9403, C9404)
K3.11.9 (Link to the Field Service Manual)