C7111 (C4751i)

Posted
ByEric Ditges
You are here:

Contents

Trouble typeC7111: Tray 1 lift-up motor failure
RankC
Trouble detection conditionAfter starting the motor, an error is detected for the malfunction detection signal.
Trouble isolationTray 1
Relevant electrical partsTray 1 lift-up motor (M6)Base board (BASEB)

Procedure

  1. Check the connector between M6-BASEB CN19E for proper connection and correct as necessary.
  2. Check the connector of M6 for proper drive coupling and correct as necessary.
  3. M6 conduction check
    • Control signal: BASEB CN19E-7 to 8
    • Location of electrical component: 10-C
  4. Replace M6.
  5. Replace BASEB.

(Link to the Field Service Manual)