C7243 (bizhub C750i)

Posted
ByAdministrator Administrator
You are here:

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

Contents

Trouble typeC7243: Exit path switch solenoid failure
RankC
Trouble detection conditionAfter starting the solenoid, an error is detected for the malfunction detection signal.
Trouble isolation–
Relevant electrical parts-Exit path switch solenoid (SD3)
-Base board (BASEB)

Procedure

  1. Check the connector between SD3-relay CN208-relay CN108-BASEB CN13E for proper connection and correct as necessary.
  2. Check the connector of SD3 for proper drive coupling and correct as necessary.
  3. SD3 conduction check.
    • Control signal: BASEB CN13E-7 (ON)
    • Location of electrical component: 14-C
  4. Replace SD3. (Part# AA7NR72600)
  5. Replace BASEB. (Part# ACKNH02101)

(Link to the Field Service Manual)