How Can We Help?

C8101 (bizhub C368/C308/C258)

You are here:

C8101 (bizhub C368/C308/C258)

Contents

Trouble typeC8101: Before reading pressure welding alienation mechanism (When DF-629 or DF-704 is installed)
RankB
Trouble detection condition<When DF-629 is installed>
• During a pressure motion being performed, the document reading sensor (PS4) output does not change from H to L.
• During a retraction motion being performed, the document reading sensor (PS4) output does not change from L to H.
• During a pressure motion being performed, the document reading sensor (PS6) output does not change from H to L.
• During a retraction motion being performed, the document reading sensor (PS6) output does not change from L to H.
Trouble isolation
Relevant electrical parts<When DF-629 is installed>
• Reading roll release motor (M5)
• Document reading sensor (PS4)
• DF control board (DFCB)
• Reading roller release motor (M4)
• Document reading sensor (PS6)
• DF control board (DFCB)

Procedure

When DF-629 is installed

  1. Check the connector between M5-DFCB J18 for proper connection and correct as necessary.
  2. Check the connector of M5 for proper drive coupling and correct as necessary.
  3. Check the connector between PS4-DFCB J10 for proper connection and correct as necessary.
  4. PS4 I/O check, sensor check
    • Control signal: DFCB J10-3 (ON)
    • Location of electrical component: DF-629 2-G
  5. M5 operation check
    • Control signal: DFCB J18-4 to 5
    • Location of electrical component: DF-629 2-G
  6. Replace M5. Part# A3CFPP6J00
  7. Replace DFCB. (Part# A87RPP1700)

NOTICE

  • Link to the wiring diagram (DF-629)

When DF-704 is installed

  1. Check the connector between M4-DFCB J18 for proper connection and correct as necessary.
  2. Check the connector of M4 for proper drive coupling and correct as necessary.
  3. Check the connector between PS6-DFCB J10 for proper connection and correct as necessary.
  4. PS6 I/O check, sensor check
    • Control signal: DFCB J10-3 (ON)
    • Location of electrical component: DF-704 2-G
  5. M4 operation check
    • Control signal: DFCB J18-4 to 5
    • Location of electrical component: DF-704 1-G
  6. Replace M4. Part# A3CEPP5700
  7. Replace DFCB. (Part# A85GPP0M00)

NOTICE

  • Link to the wiring diagram (DF-704)

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.

K.3.19.1 (Link to the Field Service Manual)

Table of Contents